One of its main drawbacks though is how long it takes to put together, but since you’ll only need to do that once, it’s a small price to pay. In terms of accessories, the Sun Joe SPX3000 pressure washer has a 20 foot pressure hose, a clean-out tool, as well as five spray tips that easily connect to the end of the hose. The Sun Joe Pressure Washer is about the size of a household vacuum cleaner. I assembled it in about 20 minutes with just a screwdriver. I was especially impressed that the unit has a very long 35-foot power cord. I had just assumed I would need an extension cord to use this in the backyard, but the built in power cord was more than enough.
With the nozzle attached and the washer plugged in, you can turn on the tap and switch the power dial at the front of the machine to On. The only other pressure washer I’ve used had a canister design, which meant you ended up dragging the canister around behind you. The Sun Joe has a design I like much better because it’s a stand-up cart on two wheels with a handle that’s about waist-high (no bending to move it around!).
For example, if you’re going to use a pressure washer to clean surfaces and gutters around your house, there will be no need to purchase a more powerful unit. With that being considered, the SPX3000’s ergonomic, lightweight, and user-friendly design is the logical choice. In a test of portability, the Sun Joe SPX3000 is up there in the list. Portability is a vital feature in a pressure washer, especially if you’re using it for various purposes. This determines if it can easily be loaded in a vehicle or carried around the property.
This makes it easy to use one cleaner for the body of your car and then to switch to something stronger for the grime on the wheels and rims. I’ve been using one from time to time around the house, but you have to think of your neighbors when operating a gas-powered pressure washer, as they are noisy. We recently bought an RV and take that away with a trailer-load of toys.
If you do not get a very low number, it means the fuse is broken. In general, the first step in fixing a Sun Joe pressure washer is checking the fuse, the power outlet, and the power cable. The next step is to check the inlet filter, unloader sun joe spx 3000 valve, and capacitor for any damage or clogs. Ensure that there are no kinks or leaks in the hose of your pressure washer. There’s also a full 2-year warranty that covers almost everything so long as you’re using it for residential use.
Knowing the type of problem, you can use our diagnose table to find the cause and solution. If you’re looking for heavy-duty, hours-long cleaning session, you’ll probably be disappointed. Running this machine for too long can make it prone to leaks. The aluminum hose connector threads can also be stripped after a few uses, which increases leak chances. They like that it’s quiet and compact for easy storage. The handle is about waist-high so that it is easy for most people to roll around.
The sounds emitted by a pressure washer can either be mellow, or they can be painful. This can be a deciding factor when it comes time to make a purchasing decision — we concluded that noise should be worth 15% of the total score. To measure volume we employed Champion Power Equipment a sound meter to take readings right next to the machine as well as from 25 feet away. We also used a panel of judges to decide whether or not there was anything particularly annoying or bothersome about the pitch each model made at full throttle.
Disconnect the burned capacitor’s legs from the wires of the motor, and install a new one. If you are unsure how to do this, ask a professional for help. To easiest method to check this is using a replacement nozzle.
On the other hand, the lightest ones are easy to load into a vehicle, but you have to bend over and pick them up to move them around your property or job site. If you’re moving them often or over long distances, a light one that you have to carry might be harder on your back than a heavy one that rolls on the ground. At 28.2 pounds, the SPX3000 is on the lighter side of most pressure washers, so it’s easy to get in and out of a vehicle.
The first is if the pump casing is not sealed properly. The second is due to the activation of the thermal valve. To seal the casing, ensure that the seals are not broken or worn. If the water leakage is due to the activation of the thermal valve, turn off the washer and allow it to cool down for few minutes before using it again. Over time dirt from your water supply will be collected there and lower the amount of water going to the pump. A pressure washer is a way to clean your patio that doesn’t involve lots of strenuous scrubbing.