The Intex PureSpa Hot Tub is one of the highest-rated inflatable hot tubs and one of the most popular at the same time. The model also features a puncture-resistant laminated 3 ply material that helps extend the lifetime of the hot tub. With the right care, this Intex hot tub will last for a couple of years.
No, you can’t use the Intex Hot PureSpa tub during winter. This is because the heater won’t keep up with the low temperatures, which could end up damaging the hot spa. To properly run this hot tub, the temperature needs to be at least 40 degrees Fahrenheit. If you want a good quality tub with snazzy features which are ready to use as soon as your purchase arrives, then the Intex PureSpa Plus will tick all your boxes.
We know that a serious problem that can sometimes affect inflatable hot tubs is a build up of calcium in the motor, blower, and filter system. This is especially worrying if you live in a hard water area. A build up of calcium can slow down the heating system and clog up the massage jets.
If you’re expecting more guests—or if you just want a bit more room to spread out—opt for a model that has some extra seating space. Should you however still decide to setup the hot tub indoors, keep the room well vented and install it on a sturdy, levelled intex baby float foundation that is able to support the weight. One of the real plus points of the entire Index hot tub range is that they can run both the bubbles and heater simultaneously. Other inflatable manufacturers have not been able to offer this feature.
In fact both of the Intex tubs that we’re looking at both have the same built in features that the more expensive models in the range offer. Electric shock drowning occurs when electrified water acts as an electricity conductor. An electric current can pass through the body of someone while they’re in the hot tub. Side panels can be removed easily and are cheaper. The panels allow you to change the exterior appearance of your hot tub. This Intex model has everything you need for physical relaxation.
•Place the control panel within 5 m of the control base unit. Check the set water temperature and consider lowering it for the times when the spa will typically not be in use. If the heating system is activated it will override the filter pump preset intex frame pool time function. Fill the spa tub with fresh water to a level between MIN and MAX marked on the inside of the spa wall. Never move the spa tub with water inside and/or with the control base attached to the spa as the spa or control base may be damaged.